Cable Runway Support
Infrastruture Components
|
Mfr |
ModelNo |
AvailabilityNotes |
Description |
|
MTP |
HCK-.5 |
Factory Direct |
Runway/Tier Support Clip Kit, Zinc Plated, used to
support ladder rack (of 1-1/2" stringer/sidebar height)
with 1/2" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HCK-2-.5 |
Factory Direct |
Runway/Tier Support Clip Kit, Zinc Plated, used to
support ladder rack (of 2" stringer/sidebar height) with
1/2" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HCK |
Factory Direct |
Runway/Tier Support Clip Kit, Zinc Plated, used to
support ladder rack (of 1-1/2" stringer/sidebar height)
with 5/8" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HCK-2 |
Factory Direct |
Runway/Tier Support Clip Kit, Zinc Plated, used to
support ladder rack (of 2" stringer/sidebar height) with
5/8" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HCK-.5-YC |
Factory Direct |
Runway/Tier Support Clip Kit, Gold Iridite, used to
support ladder rack (of 1-1/2" stringer/sidebar height)
with 1/2" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HCK-2-.5-YC |
Factory Direct |
Runway/Tier Support Clip Kit, Gold Iridite, used to
support ladder rack (of 2" stringer/sidebar height) with
1/2" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HCK-YC |
Factory Direct |
Runway/Tier Support Clip Kit, Gold Iridite, used to
support ladder rack (of 1-1/2" stringer/sidebar height)
with 5/8" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HCK-2-YC |
Factory Direct |
Runway/Tier Support Clip Kit, Gold Iridite, used to
support ladder rack (of 2" stringer/sidebar height) with
5/8" threaded rod (rod not included), contains (2)
hanger clips, (2) lock washers, (2) hex nuts, 0.75 lbs |
|
MTP |
HC-.5 |
Factory Direct |
Runway Support Clip, Zinc Plated, used to support ladder
rack (of 1-1/2" stringer/sidebar height) with 1/2"
threaded rod (rod not included), contains no hardware,
0.75 lbs |
|
MTP |
HC-2-.5 |
Factory Direct |
Runway Support Clip, Zinc Plated, used to support ladder
rack (of 2" stringer/sidebar height) with 1/2" threaded
rod (rod not included), contains no hardware, 0.75 lbs |
|
MTP |
HC |
Factory Direct |
Runway Support Clip, Zinc Plated, used to support ladder
rack (of 1-1/2" stringer/sidebar height) with 5/8"
threaded rod (rod not included), contains no hardware,
0.75 lbs |
|
MTP |
HC-2 |
Factory Direct |
Runway Support Clip, Zinc Plated, used to support ladder
rack (of 2" stringer/sidebar height) with 5/8" threaded
rod (rod not included), contains no hardware, 0.75 lbs |
|
MTP |
HC-.5-YC |
Factory Direct |
Runway Support Clip, Gold Iridite, used to support
ladder rack (of 1-1/2" stringer/sidebar height) with
1/2" threaded rod (rod not included), contains no
hardware, 0.75 lbs |
|
MTP |
HC-2-.5-YC |
Factory Direct |
Runway Support Clip, Gold Iridite, used to support
ladder rack (of 2" stringer/sidebar height) with 1/2"
threaded rod (rod not included), contains no hardware,
0.75 lbs |
|
MTP |
HC-YC |
Factory Direct |
Runway Support Clip, Gold Iridite, used to support
ladder rack (of 1-1/2" stringer/sidebar height) with
5/8" threaded rod (rod not included), contains no
hardware, 0.75 lbs |
|
MTP |
HC-2-YC |
Factory Direct |
Runway Support Clip, Gold Iridite, used to support
ladder rack (of 2" stringer/sidebar height) with 5/8"
threaded rod (rod not included), contains no hardware,
0.75 lbs |
|
MTP |
SHCK-.5 |
Factory Direct |
Slotted Hanger Clip Kit, Zinc Plated, used to support
ladder rack (of 1-1/2" stringer/sidebar height) from
suspended 1/2" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.84 lbs |
|
MTP |
SHCK-2-.5 |
Factory Direct |
Slotted Hanger Clip Kit, Zinc Plated, used to support
ladder rack (of 2" stringer/sidebar height) from
suspended 1/2" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.96 lbs |
|
MTP |
SHCK |
Factory Direct |
Slotted Hanger Clip Kit, Zinc Plated, used to support
ladder rack (of 1-1/2" stringer/sidebar height) from
suspended 5/8" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.84 lbs |
|
MTP |
SHCK-2 |
Factory Direct |
Slotted Hanger Clip Kit, Zinc Plated, used to support
ladder rack (of 2" stringer/sidebar height) from
suspended 5/8" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.96 lbs |
|
MTP |
SHCK-.5-YC |
Factory Direct |
Slotted Hanger Clip Kit, Gold Iridite, used to support
ladder rack (of 1-1/2" stringer/sidebar height) from
suspended 1/2" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.84 lbs |
|
MTP |
SHCK-2-.5-YC |
Factory Direct |
Slotted Hanger Clip Kit, Gold Iridite, used to support
ladder rack (of 2" stringer/sidebar height) from
suspended 1/2" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.96 lbs |
|
MTP |
SHCK-YC |
Factory Direct |
Slotted Hanger Clip Kit, Gold Iridite, used to support
ladder rack (of 1-1/2" stringer/sidebar height) from
suspended 5/8" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.84 lbs |
|
MTP |
SHCK-2-YC |
Factory Direct |
Slotted Hanger Clip Kit, Gold Iridite, used to support
ladder rack (of 2" stringer/sidebar height) from
suspended 5/8" threaded rod (rod not included), contains
(2) slotted hanger clips, (4) 5/8" hex nuts, (2) 5/8"
lock washers, 0.96 lbs |
|
MTP |
SHC-.5 |
Factory Direct |
Slotted Hanger Clip, Zinc Plated, used to support ladder
rack (of 1-1/2" stringer/sidebar height) from suspended
1/2" threaded rod (rod not included), contains no
hardware, 0.84 lbs |
|
MTP |
SHC-2-.5 |
Factory Direct |
Slotted Hanger Clip, Zinc Plated, used to support ladder
rack (of 2" stringer/sidebar height) from suspended 1/2"
threaded rod (rod not included), contains no hardware,
0.96 lbs |
|
MTP |
SHC |
Factory Direct |
Slotted Hanger Clip, Zinc Plated, used to support ladder
rack (of 1-1/2" stringer/sidebar height) from suspended
5/8" threaded rod (rod not included), contains no
hardware, 0.84 lbs |
|
MTP |
SHC-2 |
Factory Direct |
Slotted Hanger Clip, Zinc Plated, used to support ladder
rack (of 2" stringer/sidebar height) from suspended 5/8"
threaded rod (rod not included), contains no hardware,
0.96 lbs |
|
MTP |
SHC-.5-YC |
Factory Direct |
Slotted Hanger Clip, Gold Iridite, used to support
ladder rack (of 1-1/2" stringer/sidebar height) from
suspended 1/2" threaded rod (rod not included), contains
no hardware, 0.84 lbs |
|
MTP |
SHC-2-.5-YC |
Factory Direct |
Slotted Hanger Clip, Gold Iridite, used to support
ladder rack (of 2" stringer/sidebar height) from
suspended 1/2" threaded rod (rod not included), contains
no hardware, 0.96 lbs |
|
MTP |
SHC-YC |
Factory Direct |
Slotted Hanger Clip, Gold Iridite, used to support
ladder rack (of 1-1/2" stringer/sidebar height) from
suspended 5/8" threaded rod (rod not included), contains
no hardware, 0.84 lbs |
|
MTP |
SHC-2-YC |
Factory Direct |
Slotted Hanger Clip, Gold Iridite, used to support
ladder rack (of 2" stringer/sidebar height) from
suspended 5/8" threaded rod (rod not included), contains
no hardware, 0.96 lbs |
|
MTP |
FCK1.875-.5-2H |
Factory Direct |
Anti-Slip Framing Clip Kit (with 1/2" hardware), Zinc
Plated, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 1-1/2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 1/2" x 2-3/4" HHCS, (2) 1/2" star
washers, (2) 1/2" hex nuts, (2) 1/2" lock washers, 1.1
lbs |
|
MTP |
FCK1.875-.5-2H2 |
Factory Direct |
Anti-Slip Framing Clip Kit (with 1/2" hardware), Zinc
Plated, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 1/2" x 2-3/4" HHCS, (2) 1/2" star
washers, (2) 1/2" hex nuts, (2) 1/2" lock washers, 1.15
lbs |
|
MTP |
FCK1.875-.5-2H-YC |
Factory Direct |
Anti-Slip Framing Clip Kit (with 1/2" hardware), Gold
Iridite, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 1-1/2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 1/2" x 2-3/4" HHCS, (2) 1/2" star
washers, (2) 1/2" hex nuts, (2) 1/2" lock washers, 1.1
lbs |
|
MTP |
FCK1.875-.5-2H2-YC |
Factory Direct |
Anti-Slip Framing Clip Kit (with 1/2" hardware), Gold
Iridite, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 1/2" x 2-3/4" HHCS, (2) 1/2" star
washers, (2) 1/2" hex nuts, (2) 1/2" lock washers, 1.15
lbs |
|
MTP |
FK1.875-5/8-2H |
Factory Direct |
Anti-Slip Framing Clip Kit (with 5/8" hardware), Zinc
Plated, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 1-1/2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 5/8" x 3" HHCS, (1) 1/2" star washer,
(1) 5/8" lock washer, (1) 1/2" hex nut, (1) 5/8" hex
nut, (1) 1/2" lock washer, (1) 5/8" star washer, 1.15
lbs |
|
MTP |
FK1.875-5/8-2H2 |
Factory Direct |
Anti-Slip Framing Clip Kit (with 5/8" hardware), Zinc
Plated, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 5/8" x 3" HHCS, (1) 1/2" star washer,
(1) 5/8" lock washer, (1) 1/2" hex nut, (1) 5/8" hex
nut, (1) 1/2" lock washer, (1) 5/8" star washer, 1.2 lbs |
|
MTP |
FK1.875-5/8-2H-YC |
Factory Direct |
Anti-Slip Framing Clip Kit (with 5/8" hardware), Gold
Iridite, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 1-1/2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 5/8" x 3" HHCS, (1) 1/2" star washer,
(1) 5/8" lock washer, (1) 1/2" hex nut, (1) 5/8" hex
nut, (1) 1/2" lock washer, (1) 5/8" star washer, 1.15
lbs |
|
MTP |
FK1.875-5/8-2H2-YC |
Factory Direct |
Anti-Slip Framing Clip Kit (with 5/8" hardware), Gold
Iridite, used in seismic zones or when extra strength is
required to attach ladder rack stringers (of 2"
stringer/sidebar height) perpendicular to auxiliary
channel pair, contains (1) 1/2" "J" Clip, (2) anti-slip
framing clips, (1) 5/8" x 3" HHCS, (1) 1/2" star washer,
(1) 5/8" lock washer, (1) 1/2" hex nut, (1) 5/8" hex
nut, (1) 1/2" lock washer, (1) 5/8" star washer, 1.2 lbs |
|
MTP |
CRS-2INCLIP |
Factory Direct |
Cable Rack Support Clip,
Zinc Plated, used in seismic zones or when extra
strength is required to attach ladder rack stringer (of
2" stringer/sidebar height) to auxiliary channel pair,
contains no hardware, 0.23 lbs |
|
MTP |
CRS-2INCLIP-YC |
Factory Direct |
Cable Rack Support Clip,
Gold Iridite, used in seismic zones or when extra
strength is required to attach ladder rack stringer (of
2" stringer/sidebar height) to auxiliary channel pair,
contains no hardware, 0.23 lbs |
|
MTP |
CLR-ENDSPK |
Factory Direct |
End Splice (floor mount),
Zinc Plated, used to mount ladder rack (of 1-1/2"
stringer/sidebar height) to floor or flat surface,
contains (2) REC, (2) floor mount brackets, 2.8 lbs |
|
MTP |
CLR-ENDSPK-2 |
Factory Direct |
End Splice (floor mount),
Zinc Plated, used to mount ladder rack (of 2"
stringer/sidebar height) to floor or flat surface,
contains (2) REC-2, (2) floor mount brackets, 3.4 lbs |
|
MTP |
CLR-ENDSPK-YC |
Factory Direct |
End Splice (floor mount),
Gold Iridite, used to mount ladder rack (of
1-1/2" stringer/sidebar height) to floor or flat
surface, contains (2) REC, (2) floor mount brackets, 2.8
lbs |
|
MTP |
CLR-ENDSPK-2-YC |
Factory Direct |
End Splice (floor mount),
Gold Iridite, used to mount ladder rack (of 2"
stringer/sidebar height) to floor or flat surface,
contains (2) REC-2, (2) floor mount brackets, 3.4 lbs |
|
MTP |
WCK |
Factory Direct |
Wall Clamp Kit,
Zinc Plated, used to surface mount ladder rack (of
1-1/2" stringer/sidebar height) against wall or flat
mounting surface, contains set of (2) 1-1/2" wall
clamps, 0.58 lbs |
|
MTP |
WCK-2 |
Factory Direct |
Wall Clamp Kit,
Zinc Plated, used to surface mount ladder rack (of 2"
stringer/sidebar height) against wall or flat mounting
surface, contains set of (2) 2" wall clamps, 0.68 lbs |
|
MTP |
WC |
Factory Direct |
Wall Clamp Kit,
Zinc Plated, used to surface mount ladder rack (of
1-1/2" stringer/sidebar height) against wall or flat
mounting surface, contains (1) 1-1/2" wall clamp, 0.58
lbs |
|
MTP |
WC-2 |
Factory Direct |
Wall Clamp Kit,
Zinc Plated, used to surface mount ladder rack (of 2"
stringer/sidebar height) against wall or flat mounting
surface, contains (1) 2" wall clamp, 0.68 lbs |
|
MTP |
WCK-YC |
Factory Direct |
Wall Clamp Kit,
Gold Iridite, used to surface mount ladder rack (of
1-1/2" stringer/sidebar height) against wall or flat
mounting surface, contains set of (2) 1-1/2" wall
clamps, 0.58 lbs |
|
MTP |
WCK-2-YC |
Factory Direct |
Wall Clamp Kit,
Gold Iridite, used to surface mount ladder rack (of 2"
stringer/sidebar height) against wall or flat mounting
surface, contains set of (2) 2" wall clamps, 0.68 lbs |
|
MTP |
WC-YC |
Factory Direct |
Wall Clamp Kit,
Gold Iridite, used to surface mount ladder rack (of
1-1/2" stringer/sidebar height) against wall or flat
mounting surface, contains (1) 1-1/2" wall clamp, 0.58
lbs |
|
MTP |
WC-2-YC |
Factory Direct |
Wall Clamp Kit,
Gold Iridite, used to surface mount ladder rack (of 2"
stringer/sidebar height) against wall or flat mounting
surface, contains (1) 2" wall clamp, 0.68 lbs |
|
MTP |
CLR-HDCH |
Factory Direct |
Cable Retaining Post, 7 3/4"" rise from runway surface,
Zinc Plated, used to increase cable capacity fill
in runways (for mounting to 1-1/2" stringer/sidebar
height), contains (1) 5/16" wire bracket, (1) clip, (1)
1/4"x 1/2" HHCS w/ nylon patch, 0.75 lbs |
|
MTP |
CLR-HDCH-2 |
Factory Direct |
Cable Retaining Post, 7 3/4"" rise from runway surface,
Zinc Plated, used to increase cable capacity fill
in runways (for mounting to 2" stringer/sidebar height),
contains (1) 5/16" wire bracket, (1) clip, (1) 1/4"x
1/2" HHCS w/ nylon patch, 0.8 lbs |
|
MTP |
CLR-HDCH-YC |
Factory Direct |
Cable Retaining Post, 7 3/4"" rise from runway surface,
Gold Iridite, used to increase cable capacity
fill in runways (for mounting to 1-1/2" stringer/sidebar
height), contains (1) 5/16" wire bracket, (1) clip, (1)
1/4"x 1/2" HHCS w/ nylon patch, 0.75 lbs |
|
MTP |
CLR-HDCH-2-YC |
Factory Direct |
Cable Retaining Post, 7 3/4"" rise from runway surface,
Gold Iridite, used to increase cable capacity
fill in runways (for mounting to 2" stringer/sidebar
height), contains (1) 5/16" wire bracket, (1) clip, (1)
1/4"x 1/2" HHCS w/ nylon patch, 0.8 lbs |
|
MTP |
CLR-HW-5 |
Factory Direct |
Cable Retaining Post, 5" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.2 lbs |
|
MTP |
CLR-HW-2-5 |
Factory Direct |
Cable Retaining Post, 5" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.25 lbs |
|
MTP |
CLR-HW-6 |
Factory Direct |
Cable Retaining Post, 6" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.3 lbs |
|
MTP |
CLR-HW-2-6 |
Factory Direct |
Cable Retaining Post, 6" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.35 lbs |
|
MTP |
CLR-HW-7 |
Factory Direct |
Cable Retaining Post, 7" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.4 lbs |
|
MTP |
CLR-HW-2-7 |
Factory Direct |
Cable Retaining Post, 7" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.45 lbs |
|
MTP |
CLR-HW-8 |
Factory Direct |
Cable Retaining Post, 8" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.5 lbs |
|
MTP |
CLR-HW-2-8 |
Factory Direct |
Cable Retaining Post, 8" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.55 lbs |
|
MTP |
CLR-HW-9 |
Factory Direct |
Cable Retaining Post, 9" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.6 lbs |
|
MTP |
CLR-HW-2-9 |
Factory Direct |
Cable Retaining Post, 9" rise from runway surface,
Zinc Plated, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.65 lbs |
|
MTP |
CLR-HW-5-YC |
Factory Direct |
Cable Retaining Post, 5" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.2 lbs |
|
MTP |
CLR-HW-2-5-YC |
Factory Direct |
Cable Retaining Post, 5" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.25 lbs |
|
MTP |
CLR-HW-6-YC |
Factory Direct |
Cable Retaining Post, 6" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.3 lbs |
|
MTP |
CLR-HW-2-6-YC |
Factory Direct |
Cable Retaining Post, 6" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.35 lbs |
|
MTP |
CLR-HW-7-YC |
Factory Direct |
Cable Retaining Post, 7" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.4 lbs |
|
MTP |
CLR-HW-2-7-YC |
Factory Direct |
Cable Retaining Post, 7" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.45 lbs |
|
MTP |
CLR-HW-8-YC |
Factory Direct |
Cable Retaining Post, 8" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.5 lbs |
|
MTP |
CLR-HW-2-8-YC |
Factory Direct |
Cable Retaining Post, 8" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.55 lbs |
|
MTP |
CLR-HW-9-YC |
Factory Direct |
Cable Retaining Post, 9" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 1.5
stringer/sidebar height), contains (1) stringer clip,
(1) post, (1) post cap, 0.6 lbs |
|
MTP |
CLR-HW-2-9-YC |
Factory Direct |
Cable Retaining Post, 9" rise from runway surface,
Gold Iridite, used to increase cable capacity for
ladder rack cabling (for mounting to 2 stringer/sidebar
height), contains (1) stringer clip, (1) post, (1) post
cap, 0.65 lbs |
|
MTP |
CLR-RP |
Factory Direct |
Cable Ladder Rack Post,
Zinc Plated, used to retain cabling from sides of
ladder rack (for mounting to 1-1/2" stringer/sidebar
height), contains (1) retainer post, (1) retainer post
bracket, (1) end cap, (1) 1/4-20 hardware kit, 1 lbs |
|
MTP |
CLR-RP-2 |
Factory Direct |
Cable Ladder Rack Post,
Zinc Plated, used to retain cabling from sides of
ladder rack (for mounting to 2" stringer/sidebar
height), contains (1) retainer post, (1) retainer post
bracket, (1) end cap, (1) 1/4-20 hardware kit, 1.1 lbs |
|
MTP |
CLR-RP-YC |
Factory Direct |
Cable Ladder Rack Post,
Gold Iridite, used to retain cabling from sides
of ladder rack (for mounting to 1-1/2" stringer/sidebar
height), contains (1) retainer post, (1) retainer post
bracket, (1) end cap, (1) 1/4-20 hardware kit, 1 lbs |
|
MTP |
CLR-RP-2-YC |
Factory Direct |
Cable Ladder Rack Post,
Gold Iridite, used to retain cabling from sides
of ladder rack (for mounting to 2" stringer/sidebar
height), contains (1) retainer post, (1) retainer post
bracket, (1) end cap, (1) 1/4-20 hardware kit, 1.1 lbs |
|
MTP |
PSCS |
Factory Direct |
Power & Signal Cable Support ("field goal post"),
13-1/2"" rise from runway surface,
Zinc Plated, used to attach to cable runway to
separate and support power and signal cables (for
mounting to 1-1/2" stringer/sidebar height), contains
(1) post assembly, (1) 1-1/2" clip, (4) post caps, 0 lbs |
|
MTP |
PSCS-2 |
Factory Direct |
Power & Signal Cable Support ("field goal post"),
13-1/2"" rise from runway surface,
Zinc Plated, used to attach to cable runway to
separate and support power and signal cables (for
mounting to 2" stringer/sidebar height), contains (1)
post assembly, (1) 2" clip, (4) post caps, 0 lbs |
|
MTP |
PSCS-YC |
Factory Direct |
Power & Signal Cable Support ("field goal post"),
13-1/2"" rise from runway surface,
Gold Iridite, used to attach to cable runway to
separate and support power and signal cables (for
mounting to 1-1/2" stringer/sidebar height), contains
(1) post assembly, (1) 1-1/2" clip, (4) post caps, 0 lbs |
|
MTP |
PSCS-2-YC |
Factory Direct |
Power & Signal Cable Support ("field goal post"),
13-1/2"" rise from runway surface,
Gold Iridite, used to attach to cable runway to
separate and support power and signal cables (for
mounting to 2" stringer/sidebar height), contains (1)
post assembly, (1) 2" clip, (4) post caps, 0 lbs |
|
MTP |
PCS |
Factory Direct |
Power Cable Outside Support Bracket, 5.25" span with
1-7/8" drop, Zinc Plated, used with either 3/8" x 1.5"
or 3/8" x 2" cable runway as side-of-runway cable
support, contains (1) power cable support bracket, (1)
12-24 x 1/2" PHMS, (1) 12-24 hex nut, 0.35 lbs |
|
MTP |
PCS-YC |
Factory Direct |
Power Cable Outside Support Bracket, 5.25" span with
1-7/8" drop Gold Iridite, used with either 3/8" x 1.5"
or 3/8" x 2" cable runway as side-of-runway cable
support, contains (1) power cable support bracket, (1)
12-24 x 1/2" PHMS, (1) 12-24 hex nut, 0.35 lbs |
|
MTP |
PCS-2.5-2 |
Factory Direct |
Power Cable Outside Support Bracket, 2.5" span with
1-7/8" drop, Zinc Plated, used with either 3/8" x 1.5"
or 3/8" x 2" cable runway as side-of-runway cable
support, contains (1) power cable support bracket, (1)
12-24 x 1/2" PHMS, (1) 12-24 hex nut, 0.28 lbs |
|
MTP |
PCS-2.5-2-YC |
Factory Direct |
Power Cable Outside Support Bracket, 2.5" span with
1-7/8" drop Gold Iridite, used with either 3/8" x 1.5"
or 3/8" x 2" cable runway as side-of-runway cable
support, contains (1) power cable support bracket, (1)
12-24 x 1/2" PHMS, (1) 12-24 hex nut, 0.28 lbs |
|
MTP |
PCS-2 |
Factory Direct |
Power Cable Inside Support Drop Bracket, 5" span with
4-5/16" drop, Zinc Plated, used with either 3/8" x 1.5"
or 3/8" x 2" cable runway as side-of-runway cable
support, contains (1) power cable support bracket, (1)
1/4" x 1" HHCS, (1) 1/4" flat washer, 0.65 lbs |
|
MTP |
PCS-3 |
Factory Direct |
Power Cable Inside Support Drop Bracket, 5.25" span with
7.5" drop, Zinc Plated, used with either 3/8" x 1.5" or
3/8" x 2" cable runway as side-of-runway cable support,
contains (1) power cable support bracket, (1) 1/4" x 1"
HHCS, (1) 1/4" flat washer, 0.85 lbs |
|
MTP |
PCS-2-YC |
Factory Direct |
Power Cable Inside Support Drop Bracket, 5" span with
4-5/16" drop Gold Iridite, used with either 3/8" x 1.5"
or 3/8" x 2" cable runway as side-of-runway cable
support, contains (1) power cable support bracket, (1)
1/4" x 1" HHCS, (1) 1/4" flat washer, 0.65 lbs |
|
MTP |
PCS-3-YC |
Factory Direct |
Power Cable Inside Support Drop Bracket, 5.25" span with
7.5" drop Gold Iridite, used with either 3/8" x 1.5" or
3/8" x 2" cable runway as side-of-runway cable support,
contains (1) power cable support bracket, (1) 1/4" x 1"
HHCS, (1) 1/4" flat washer, 0.85 lbs |
|
MTP |
PCS-2A |
Factory Direct |
Power Cable Inside Support Drop Bracket, 5.25" span with
6.5" drop, Zinc Plated, used with either 3/8" x 1.5" or
3/8" x 2" cable runway as side-of-runway cable support,
contains (1) power cable support bracket, (1) 1/4" x 1"
HHCS, (1) 1/4" flat washer, 0.75 lbs |
|
MTP |
PCS-2A-YC |
Factory Direct |
Power Cable Inside Support Drop Bracket, 5.25" span with
6.5" drop Gold Iridite, used with either 3/8" x 1.5" or
3/8" x 2" cable runway as side-of-runway cable support,
contains (1) power cable support bracket, (1) 1/4" x 1"
HHCS, (1) 1/4" flat washer, 0.75 lbs |
|
MTP |
PCS-2W-DB |
Factory Direct |
Power Cable Inside Support Drop Bracket, (2) 5-7/16"
spans with 6-5/16" drop, and 8.5" drop, Zinc Plated,
used with either 3/8" x 1.5" or 3/8" x 2" cable runway
as side-of-runway cable support, contains (1) double
power cable support bracket, (1) 1/4" x 1" HHCS, (1)
1/4" flat washer, 1.5 lbs |
|
MTP |
PCS-2W-DB-YC |
Factory Direct |
Power Cable Inside Support Drop Bracket, (2) 5-7/16"
spans with 6-5/16" drop and 8.5" drop Gold Iridite, used
with either 3/8" x 1.5" or 3/8" x 2" cable runway as
side-of-runway cable support, contains (1) double power
cable support bracket, (1) 1/4" x 1" HHCS, (1) 1/4" flat
washer, 1.5 lbs |
|
MTP |
RWSK-5GR |
Factory Direct |
Runway Wall Support Kit, 5"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 1.8 lbs |
|
MTP |
RWSK-6GR |
Factory Direct |
Runway Wall Support Kit, 6"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 2.15 lbs |
|
MTP |
RWSK-12GR |
Factory Direct |
Runway Wall Support Kit, 12"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 3.75 lbs |
|
MTP |
RWSK-15GR |
Factory Direct |
Runway Wall Support Kit, 15"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 4.55 lbs |
|
MTP |
RWSK-18GR |
Factory Direct |
Runway Wall Support Kit, 18"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 5.45 lbs |
|
MTP |
RWSK-20GR |
Factory Direct |
Runway Wall Support Kit, 20"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 5.65 lbs |
|
MTP |
RWSK-24GR |
Factory Direct |
Runway Wall Support Kit, 24"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 6.75 lbs |
|
MTP |
RWSK-30GR |
Factory Direct |
Runway Wall Support Kit, 30"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 1-1/2" stringer/sidebar height) to flat
surface or wall, contains (1) runway support angle, (2)
5/16" "J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock
washers, 8.25 lbs |
|
MTP |
RWSK-5GR-2 |
Factory Direct |
Runway Wall Support Kit, 5"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
1.8 lbs |
|
MTP |
RWSK-6GR-2 |
Factory Direct |
Runway Wall Support Kit, 6"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
2.15 lbs |
|
MTP |
RWSK-12GR-2 |
Factory Direct |
Runway Wall Support Kit, 12"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
3.75 lbs |
|
MTP |
RWSK-15GR-2 |
Factory Direct |
Runway Wall Support Kit, 15"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
4.55 lbs |
|
MTP |
RWSK-18GR-2 |
Factory Direct |
Runway Wall Support Kit, 18"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
5.45 lbs |
|
MTP |
RWSK-20GR-2 |
Factory Direct |
Runway Wall Support Kit, 20"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
5.65 lbs |
|
MTP |
RWSK-24GR-2 |
Factory Direct |
Runway Wall Support Kit, 24"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
6.75 lbs |
|
MTP |
RWSK-30GR-2 |
Factory Direct |
Runway Wall Support Kit, 30"" width,
Steel, Powdercoat Telco Grey, used to mount cable
runway (of 2" stringer/sidebar height) to flat surface
or wall, contains (1) runway support angle, (2) 5/16"
"J" Bolts, (2) 5/16" hex nuts, (2) 5/16" lock washers,
8.25 lbs |
|
MTP |
RWS-5 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 5" ladder width, 7"
total angle length, used to mount cable runway to flat
surface or wall, contains no hardware, 1.6 lbs |
|
MTP |
RWS-6 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 6" ladder width, 8"
total angle length, used to mount cable runway to flat
surface or wall, contains no hardware, 1.95 lbs |
|
MTP |
RWS-12 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 12" ladder width,
14" total angle length, used to mount cable runway to
flat surface or wall, contains no hardware, 3.55 lbs |
|
MTP |
RWS-15 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 15" ladder width,
17" total angle length, used to mount cable runway to
flat surface or wall, contains no hardware, 3.55 lbs |
|
MTP |
RWS-18 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 18" ladder width,
20" total angle length, used to mount cable runway to
flat surface or wall, contains no hardware, 5.25 lbs |
|
MTP |
RWS-20 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 20" ladder width,
22" total angle length, used to mount cable runway to
flat surface or wall, contains no hardware, 5.45 lbs |
|
MTP |
RWS-24 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 24" ladder width,
26" total angle length, used to mount cable runway to
flat surface or wall, contains no hardware, 6.55 lbs |
|
MTP |
RWS-30 |
Factory Direct |
Runway Wall Support Angle (2"x2"x1/4" angle), Steel,
Powdercoat Telco Grey, for use with 30" ladder width,
32" total angle length, used to mount cable runway to
flat surface or wall, contains no hardware, 8.05 lbs |
|
MTP |
JBK-CR |
Factory Direct |
J-Bolt Kit Cable Runway, Gold Iridite, used to attach
ladder rack with 1-1/2" stringer/sidebar to 2" x 1"
auxiliary support channel, contains (2) JB 5/16 x 3
1/4E-YC, (1) THP-3 3/4-YC, (2) 5/16" hex nuts, (2) 5/16"
lock washers, 0.4 lbs |
|
MTP |
JBK-CR-2 |
Factory Direct |
J-Bolt Kit Cable Runway, Gold Iridite, used to attach
ladder rack with 2" stringer/sidebar to 2" x 1"
auxiliary support channel, contains (2) JB 5/16 x 3
3/4M-YC, (1) THP-3 3/4-YC, (2) 5/16" hex nuts, (2) 5/16"
lock washers, 0.4 lbs |
|
MTP |
LDR-CLAMP |
Factory Direct |
Ladder Clamp Kit, Steel, Powdercoat Telco Grey, used to
support upper ladder rack 12" from lower ladder rack,
both with 1-1/2" stringer/sidebars, contains (2) support
bars, (4) ladder clamps, (4) 1/2" x 1-1/4" HHCS, (4)
1/2" lock washers, 8.5 lbs |
|
MTP |
LDR-CLAMP-2 |
Factory Direct |
Ladder Clamp Kit, Steel, Powdercoat Telco Grey, used to
support upper ladder rack from lower ladder rack, both
with 2" stringer/sidebars, contains (2) support bars,
(4) ladder clamps, (4) 1/2" x 1-1/4" HHCS, (4) 1/2" lock
washers, 8.9 lbs |
|
MTP |
CLFSK-4-12 |
Factory Direct |
Runway Support Bracket, 12"" width, 4" standoff height,
Steel, Powdercoat Telco Grey, used to support ladder
rack from floor or wall, contains: (1) floor support
bracket, (2) 5/16" J-Bolt, (2) 5/16" lock washers, (2)
5/16" hex nuts, 8 lbs |
|
MTP |
CLFSK-12-12 |
Factory Direct |
Runway Support Bracket, 12"" width, 12" standoff height,
Steel, Powdercoat Telco Grey, used to support ladder
rack from floor or wall, contains: (1) floor support
bracket, (2) 5/16" J-Bolt, (2) 5/16" lock washers, (2)
5/16" hex nuts, 8.5 lbs |
|
MTP |
CLFSK-12-15 |
Factory Direct |
Runway Support Bracket, 15"" width, 12" standoff height,
Steel, Powdercoat Telco Grey, used to support ladder
rack from floor or wall, contains: (1) floor support
bracket, (2) 5/16" J-Bolt, (2) 5/16" lock washers, (2)
5/16" hex nuts, 8.7 lbs |
|
MTP |
CLFSK-12-18 |
Factory Direct |
Runway Support Bracket, 18"" width, 12" standoff height,
Steel, Powdercoat Telco Grey, used to support ladder
rack from floor or wall, contains: (1) floor support
bracket, (2) 5/16" J-Bolt, (2) 5/16" lock washers, (2)
5/16" hex nuts, 8.9 lbs |
|
MTP |
CHK15-3/8 |
Factory Direct |
Runway Ceiling Hanger Kit, Steel, Powdercoat Telco Grey,
used to suspend ladder rack with 1-1/2" stringer/sidebar
from ceiling, contains: (1) 3/8" threaded rod, (1)
ceiling support bracket, (1) 1-1/2" hanger clip, (4)
3/8" hex nuts, 3.02 lbs |
|
MTP |
CHK15-5/8 |
Factory Direct |
Runway Ceiling Hanger Kit, Steel, Powdercoat Telco Grey,
used to suspend ladder rack with 1-1/2" stringer/sidebar
from ceiling, contains: (1) 5/8" threaded rod, (1)
ceiling support bracket, (1) 1-1/2" hanger clip, (4)
5/8" hex nuts, 7.09 lbs |
|
MTP |
CHK2-3/8 |
Factory Direct |
Runway Ceiling Hanger Kit, Steel, Powdercoat Telco Grey,
used to suspend ladder rack with 2" stringer/sidebar
from ceiling, contains: (1) 3/8" threaded rod, (1)
ceiling support bracket, (1) 2" hanger clip, (4) 3/8"
hex nuts, 3.15 lbs |
|
MTP |
CHK2-5/8 |
Factory Direct |
Runway Ceiling Hanger Kit, Steel, Powdercoat Telco Grey,
used to suspend ladder rack with 2" stringer/sidebar
from ceiling, contains: (1) 5/8" threaded rod, (1)
ceiling support bracket, (1) 2" hanger clip, (4) 5/8"
hex nuts, 7.18 lbs |
|
MTP |
CLR6-RD |
Factory Direct |
Ladder Rung Radius Drop, 6" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
0.79 lbs |
|
MTP |
CLR9-RD |
Factory Direct |
Ladder Rung Radius Drop, 9" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
0.98 lbs |
|
MTP |
CLR12-RD |
Factory Direct |
Ladder Rung Radius Drop, 12" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
1.24 lbs |
|
MTP |
CLR15-RD |
Factory Direct |
Ladder Rung Radius Drop, 15" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
1.51 lbs |
|
MTP |
CLR18-RD |
Factory Direct |
Ladder Rung Radius Drop, 18" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
1.82 lbs |
|
MTP |
CLR20-RD |
Factory Direct |
Ladder Rung Radius Drop, 20" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
2.01 lbs |
|
MTP |
CLR24-RD |
Factory Direct |
Ladder Rung Radius Drop, 24" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
2.68 lbs |
|
MTP |
CLR30-RD |
Factory Direct |
Ladder Rung Radius Drop, 30" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down through rung, contains: (1) radius
drop, (3) wire management spools, (1) mounting hdwr kit,
3.21 lbs |
|
MTP |
CLR-SRD |
Factory Direct |
Sidebar (stringer) Radius Drop, 7-3/4"" width,
Steel, Powdercoat Telco Grey, used to drop cables
from runway down over sidebar (stringer), contains: (1)
radius drop, (3) wire management spools, (1) mounting
hdwr kit, 1.25 lbs |
|
MTP |
WSBKA6-12 |
Factory Direct |
Wall Support Bracket for runway from 6" to 12" wide,
Steel, Powdercoat Telco Grey, used to support
runway from wall, 7.09 lbs |
|
MTP |
WSBKA12-18 |
Factory Direct |
Wall Support Bracket for runway from 12" to 18" wide,
Steel, Powdercoat Telco Grey, used to support
runway from wall, 10.12 lbs |
|
MTP |
CLRGK |
Factory Direct |
Cable Ladder Ground Kit,
- used to continue ground/bonding from one ladder
to another ladder, contains (1) 8" CU braided wire, (2)
insulated connector terminals, (2) 12-24 machine screws,
(2) hex nuts, (2) external star washers, 0.25 lbs |
|
MTP |
CLRGK-2-6 |
Factory Direct |
Cable Ladder Ground Kit,
- used to continue ground/bonding from one ladder
to another ladder, contains (1) #6
10" groundwire, (2) 2-hole lugs, (4) SSSW1/4, (4)
HHCS1/4x20x3/4, (4) HN1/4, 0.25 lbs |
|
MTP |
GROUND KT-L3 |
Factory Direct |
Cable Ladder Ground Kit,
- used to continue ground/bonding from one ladder
to another ladder, contains (1) #6
36" groundwire, (1) 2-hole lug, (2)
SBHHCS1/4x3/4, (2) SBFW1/4, (2) SBHN1/4, (2)
SBSSW1/4INT, (1) H-Tap, 2 lbs |
|
MTP |
CLR6-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 6"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR9-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 9"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR12-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 12"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR15-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 15"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR18-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 18"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR20-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 20"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR24-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 24"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR30-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 30"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR36-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 1.5"
sidebar, 36"" width,
- used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR6-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
6"" width, - used
to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR9-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
9"" width, - used
to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR12-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
12"" width, -
used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR15-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
15"" width, -
used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR18-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
18"" width, -
used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR20-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
20"" width, -
used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR24-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
24"" width, -
used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR30-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
30"" width, -
used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLR36-2-MCM |
Factory Direct |
Movable Cross Member (adjustable add-a-rung), Steel,
Powdercoat Telco Grey, used with ladder with 2" sidebar,
36"" width, -
used to add a rung to ladder rack, 0 lbs |
|
MTP |
CLRCR |
Factory Direct |
Ladder Rack Side Cable Ring - lite duty, Zinc Plated,
for use on ladder rack with 1-1/2" stringer/sidebar, -
used to add sidebar mounted cable support, 0 lbs |
|
MTP |
CLRCR-2 |
Factory Direct |
Ladder Rack Side Cable Ring - lite duty, Zinc Plated,
for use on ladder rack with 2" stringer/sidebar, - used
to add sidebar mounted cable support, 0 lbs |
|
MTP |
CLRCR-YC |
Factory Direct |
Ladder Rack Side Cable Ring - lite duty, Gold Iridite,
for use on ladder rack with 1-1/2" stringer/sidebar, -
used to add sidebar mounted cable support, 0 lbs |
|
MTP |
CLRCR-2-YC |
Factory Direct |
Ladder Rack Side Cable Ring - lite duty, Gold Iridite,
for use on ladder rack with 2" stringer/sidebar, - used
to add sidebar mounted cable support, 0 lbs |
|
MTP |
CLRCR-H |
Factory Direct |
Horizontal Ladder Rack Cable Ring, Zinc Plated, for use
on ladder rack rung with 1" rung, - used to add rung
mounted cable support, 0 lbs |
|
MTP |
CLRCR-H-YC |
Factory Direct |
Horizontal Ladder Rack Cable Ring, Gold Iridite, for use
on ladder rack rung with 1" rung, - used to add rung
mounted cable support, 0 lbs |
|
MTP |
EWB-1/2-PL |
Factory Direct |
End Wise Brace Bar, Single Hole / Single Brace, Zinc
Plated, for use with 1/2" hardware (hdwr not included) -
used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2 lbs |
|
MTP |
EWB-5/8-PL |
Factory Direct |
End Wise Brace Bar, Single Hole / Single Brace, Zinc
Plated, for use with 5/8" hardware (hdwr not included) -
used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2 lbs |
|
MTP |
EWB2-1/2-PL |
Factory Direct |
End Wise Brace Bar, Double Hole / Single Brace, Zinc
Plated, for use with 1/2" hardware (hdwr not included) -
used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2.5 lbs |
|
MTP |
EWB2-5/8-PL |
Factory Direct |
End Wise Brace Bar, Double Hole / Single Brace, Zinc
Plated, for use with 5/8" hardware (hdwr not included) -
used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2.5 lbs |
|
MTP |
DEWB-1/2-PL |
Factory Direct |
End Wise Brace Bar, Double Hole / Double Brace, Zinc
Plated, for use with 1/2" hardware (hdwr not included) -
used to support angle iron or support strut at 45 deg
angle (braces positioned 90 degrees from each other),
contains no hardware, 3.5 lbs |
|
MTP |
DEWB-5/8-PL |
Factory Direct |
End Wise Brace Bar, Double Hole / Double Brace, Zinc
Plated, for use with 5/8" hardware (hdwr not included) -
used to support angle iron or support strut at 45 deg
angle (braces positioned 90 degrees from each other),
contains no hardware, 3.5 lbs |
|
MTP |
EWB-1/2-PL-YC |
Factory Direct |
End Wise Brace Bar, Single Hole / Single Brace, Gold
Iridite, for use with 1/2" hardware (hdwr not included)
- used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2 lbs |
|
MTP |
EWB-5/8-PL-YC |
Factory Direct |
End Wise Brace Bar, Single Hole / Single Brace, Gold
Iridite, for use with 5/8" hardware (hdwr not included)
- used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2 lbs |
|
MTP |
EWB2-1/2-PL-YC |
Factory Direct |
End Wise Brace Bar, Double Hole / Single Brace, Gold
Iridite, for use with 1/2" hardware (hdwr not included)
- used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2.5 lbs |
|
MTP |
EWB2-5/8-PL-YC |
Factory Direct |
End Wise Brace Bar, Double Hole / Single Brace, Gold
Iridite, for use with 5/8" hardware (hdwr not included)
- used to support angle iron or support strut at 45 deg
angle, contains no hardware, 2.5 lbs |
|
MTP |
DEWB-1/2-PL-YC |
Factory Direct |
End Wise Brace Bar, Double Hole / Double Brace, Gold
Iridite, for use with 1/2" hardware (hdwr not included)
- used to support angle iron or support strut at 45 deg
angle (braces positioned 90 degrees from each other),
contains no hardware, 3.5 lbs |
|
MTP |
DEWB-5/8-PL-YC |
Factory Direct |
End Wise Brace Bar, Double Hole / Double Brace, Gold
Iridite, for use with 5/8" hardware (hdwr not included)
- used to support angle iron or support strut at 45 deg
angle (braces positioned 90 degrees from each other),
contains no hardware, 3.5 lbs |
|
MTP |
EWB-1/2-SA-K |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB-5/8-SA-K |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB-1/2-SS-K |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB-5/8-SS-K |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-1/2-SA-K |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-5/8-SA-K |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-1/2-SS-K |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-5/8-SS-K |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-1/2-SA-K |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-5/8-SA-K |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-1/2-SS-K |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-5/8-SS-K |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Zinc Plated,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
EWB-1/2-SA-K-YC |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB-5/8-SA-K-YC |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB-1/2-SS-K-YC |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB-5/8-SS-K-YC |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) framing clip
kit, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-1/2-SA-K-YC |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-5/8-SA-K-YC |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-1/2-SS-K-YC |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
EWB2-5/8-SS-K-YC |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (1) single hole bar, (1) double hole
bar, (2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-1/2-SA-K-YC |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-5/8-SA-K-YC |
Factory Direct |
End Wise Brace Kits, STEEL ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-1/2-SS-K-YC |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
DEWB-5/8-SS-K-YC |
Factory Direct |
End Wise Brace Kits, SUPPORT ANGLE BRACE, Gold Iridite,
used to support angle iron or support strut at 45 deg
angle, contains (2) single hole bars, (1) double bar,
(2) framing clip kits, (1) hardware kit, 0 lbs |
|
MTP |
CLR-ASK |
Factory Direct |
Angle Support, for use with ladder rack equipped with
1-1/2" stringer/sidebar, Zinc Plated, used to attach
vertically mounted cable rack to horizontal cable rack,
contains no hardware, 3.25 lbs |
|
MTP |
CLR2-ASK |
Factory Direct |
Angle Support, for use with ladder rack equipped with 2"
stringer/sidebar, Zinc Plated, used to attach vertically
mounted cable rack to horizontal cable rack, contains no
hardware, 3.75 lbs |
|
MTP |
CLR-ASK-YC |
Factory Direct |
Angle Support, Gold Iridite, for use with ladder rack
equipped with 1-1/2" stringer/sidebar - used to attach
vertically mounted cable rack to horizontal cable rack,
contains no hardware, 3.25 lbs |
|
MTP |
CLR2-ASK-YC |
Factory Direct |
Angle Support, Gold Iridite, for use with ladder rack
equipped with 2" stringer/sidebar - used to attach
vertically mounted cable rack to horizontal cable rack,
contains no hardware, 3.75 lbs |
|
MTP |
CLR-6-CSB |
Factory Direct |
Cable Support Bar, Steel, Powdercoat Telco Grey, 6""
width, 1/2 in. OD, 3/8 in. threaded both ends,
- used to support cable runs when using
adjustable runway connection kit (adj runway connection
kit not included), 0 lbs |
|
MTP |
CLR-9-CSB |
Factory Direct |
Cable Support Bar, Steel, Powdercoat Telco Grey, 9""
width, 1/2 in. OD, 3/8 in. threaded both ends,
- used to support cable runs when using
adjustable runway connection kit (adj runway connection
kit not included), 0 lbs |
|
MTP |
CLR-12-CSB |
Factory Direct |
Cable Support Bar, Steel, Powdercoat Telco Grey, 12""
width, 1/2 in. OD, 3/8 in. threaded both ends,
- used to support cable runs when using
adjustable runway connection kit (adj runway connection
kit not included), 0 lbs |
|
MTP |
CLR-15-CSB |
Factory Direct |
Cable Support Bar, Steel, Powdercoat Telco Grey, 15""
width, 1/2 in. OD, 3/8 in. threaded both ends,
- used to support cable runs when using
adjustable runway connection kit (adj runway connection
kit not included), 0 lbs |
|
MTP |
CLR-18-CSB |
Factory Direct |
Cable Support Bar, Steel, Powdercoat Telco Grey, 18""
width, 1/2 in. OD, 3/8 in. threaded both ends,
- used to support cable runs when using
adjustable runway connection kit (adj runway connection
kit not included), 0 lbs |
|
MTP |
CLR-20-CSB |
Factory Direct |
Cable Support Bar, Steel, Powdercoat Telco Grey, 20""
width, 1/2 in. OD, 3/8 in. threaded both ends,
- used to support cable runs when using
adjustable runway connection kit (adj runway connection
kit not included), 0 lbs |
|
MTP |
CLR-24-CSB |
Factory Direct |
Cable Support Bar, Steel, Powdercoat Telco Grey, 24""
width, 1/2 in. OD, 3/8 in. threaded both ends,
- used to support cable runs when using
adjustable runway connection kit (adj runway connection
kit not included), 0 lbs |
|
MTP |
CLR-6-CSB-ZP |
Factory Direct |
Cable Support Bar, 6"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Zinc Plated, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-9-CSB-ZP |
Factory Direct |
Cable Support Bar, 9"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Zinc Plated, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-12-CSB-ZP |
Factory Direct |
Cable Support Bar, 12"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Zinc Plated, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-15-CSB-ZP |
Factory Direct |
Cable Support Bar, 15"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Zinc Plated, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-18-CSB-ZP |
Factory Direct |
Cable Support Bar, 18"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Zinc Plated, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-20-CSB-ZP |
Factory Direct |
Cable Support Bar, 20"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Zinc Plated, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-24-CSB-ZP |
Factory Direct |
Cable Support Bar, 24"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Zinc Plated, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-6-CSB-YC |
Factory Direct |
Cable Support Bar, 6"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Gold Iridite, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-9-CSB-YC |
Factory Direct |
Cable Support Bar, 9"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Gold Iridite, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-12-CSB-YC |
Factory Direct |
Cable Support Bar, 12"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Gold Iridite, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-15-CSB-YC |
Factory Direct |
Cable Support Bar, 15"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Gold Iridite, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-18-CSB-YC |
Factory Direct |
Cable Support Bar, 18"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Gold Iridite, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-20-CSB-YC |
Factory Direct |
Cable Support Bar, 20"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Gold Iridite, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
MTP |
CLR-24-CSB-YC |
Factory Direct |
Cable Support Bar, 24"" width, 1/2 in. OD, 3/8 in.
threaded both ends, Gold Iridite, used to support cable
runs when using adjustable runway connection kit (adj
runway connection kit not included), 0 lbs |
|
