Cable Runway Accessories
|
Mfr |
ModelNo |
AvailabilityNotes |
Description |
|
MTP |
CSK |
Factory Direct |
Corner Support Kit, Powdercoat Telco Grey, used with
1.5" LADDER - used for additional support on 90 deg
junction for cable ladder rack, contains (1) corner
support brace, (4) corner clamp brackets, (2) "s" clips,
(2) 3/8" carriage bolts, (2) 3/8" lock washers, (2) 3/8"
hex nuts, 5 lbs |
|
MTP |
CSK-2 |
Factory Direct |
Corner Support Kit, Powdercoat Telco Grey, used with 2"
LADDER - used for additional support on 90 deg junction
for cable ladder rack, contains (1) corner support
brace, (4) corner clamp brackets, (2) "s" clips, (2)
3/8" carriage bolts, (2) 3/8" lock washers, (2) 3/8" hex
nuts, 6.25 lbs |
|
MTP |
CSK-YC |
Factory Direct |
Corner Support Kit, Gold Iridite, used with 1.5" LADDER
- used for additional support on 90 deg junction for
cable ladder rack, contains (1) corner support brace,
(4) corner clamp brackets, (2) "s" clips, (2) 3/8"
carriage bolts, (2) 3/8" lock washers, (2) 3/8" hex
nuts, 5 lbs |
|
MTP |
CSK-2-YC |
Factory Direct |
Corner Support Kit, Gold Iridite, used with 2" LADDER -
used for additional support on 90 deg junction for cable
ladder rack, contains (1) corner support brace, (4)
corner clamp brackets, (2) "s" clips, (2) 3/8" carriage
bolts, (2) 3/8" lock washers, (2) 3/8" hex nuts, 6.25
lbs |
|
MTP |
ENDCAP1 1/2X3/8 |
Factory Direct |
End Caps for ladder side bar (Lot of 10) black neoprene
rubber, 3/8"" width, used with 1.5" LADDER - used as a
protective covering for stringer and auxiliary support
ends, 0.4 lbs |
|
MTP |
ENDCAP2X3/8 (cdr55166) |
Factory Direct |
End Caps for ladder side bar (Lot of 10) black neoprene
rubber, 3/8"" width, used with 2" LADDER - used as a
protective covering for stringer and auxiliary support
ends, 0.4 lbs |
|
MTP |
CLRP-6 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 4-1/4"" width,
use with 6" Ladder/Runway width - used to provide
continuous support for runway cable, 1.5 lbs |
|
MTP |
CLRP-12 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 10-1/4"" width,
use with 12" Ladder/Runway width - used to provide
continuous support for runway cable, 3.9 lbs |
|
MTP |
CLRP-15 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 13-1/4"" width,
use with 15" Ladder/Runway width - used to provide
continuous support for runway cable, 5 lbs |
|
MTP |
CLRP-18 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 16-1/4"" width,
use with 18" Ladder/Runway width - used to provide
continuous support for runway cable, 6.2 lbs |
|
MTP |
CLRP-20 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 18-1/4"" width,
use with 20" Ladder/Runway width - used to provide
continuous support for runway cable, 7.4 lbs |
|
MTP |
CLRP-24 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 22-1/4"" width,
use with 24" Ladder/Runway width - used to provide
continuous support for runway cable, 8.5 lbs |
|
MTP |
CLRP-30 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 28-1/4"" width,
use with 30" Ladder/Runway width - used to provide
continuous support for runway cable, 10.8 lbs |
|
MTP |
CLRP-36 |
Factory Direct |
Cable Runway Pan, .032 Aluminum Sheet, 34-1/4"" width,
use with 36" Ladder/Runway width - used to provide
continuous support for runway cable, 13.1 lbs |
|
MTP |
CLRP-6-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 4-1/4"" width, use with 6"
Ladder/Runway width - used to provide continuous support
for runway cable, 1.5 lbs |
|
MTP |
CLRP-12-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 10-1/4"" width, use with 12"
Ladder/Runway width - used to provide continuous support
for runway cable, 3.9 lbs |
|
MTP |
CLRP-15-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 13-1/4"" width, use with 15"
Ladder/Runway width - used to provide continuous support
for runway cable, 5 lbs |
|
MTP |
CLRP-18-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 16-1/4"" width, use with 18"
Ladder/Runway width - used to provide continuous support
for runway cable, 6.2 lbs |
|
MTP |
CLRP-20-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 18-1/4"" width, use with 20"
Ladder/Runway width - used to provide continuous support
for runway cable, 7.4 lbs |
|
MTP |
CLRP-24-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 22-1/4"" width, use with 24"
Ladder/Runway width - used to provide continuous support
for runway cable, 8.5 lbs |
|
MTP |
CLRP-30-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 28-1/4"" width, use with 30"
Ladder/Runway width - used to provide continuous support
for runway cable, 10.8 lbs |
|
MTP |
CLRP-36-PL |
Factory Direct |
Cable Runway Pan, Thermoplastic - .028 KYDEX PVC, Orange
or Gray UL 94VO Rated, 34-1/4"" width, use with 36"
Ladder/Runway width - used to provide continuous support
for runway cable, 13.1 lbs |
|
MTP |
JCL-FC1.5 |
Factory Direct |
J-Clip Kit, Zinc
Plated, Used to mount laddder rack with 1.5" sidebar to
(2) 2" x 3/8" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-FC1.875T |
Factory Direct |
J-Clip Kit, Zinc
Plated, Used to mount laddder rack with 1.5" sidebar to
(2) 2" x 9/16" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-FC1.5-2 |
Factory Direct |
J-Clip Kit, Zinc
Plated, Used to mount laddder rack with 2" sidebar to
(2) 2" x 3/8" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-FC1.875T-2 |
Factory Direct |
J-Clip Kit, Zinc
Plated, Used to mount laddder rack with 2" sidebar to
(2) 2" x 9/16" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-FC1.5-YC |
Factory Direct |
J-Clip Kit, Gold
Iridite, Used to mount laddder rack with 1.5" sidebar to
(2) 2" x 3/8" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-FC1.875T-YC |
Factory Direct |
J-Clip Kit, Gold
Iridite, Used to mount laddder rack with 1.5" sidebar to
(2) 2" x 9/16" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-FC1.5-2-YC |
Factory Direct |
J-Clip Kit, Gold
Iridite, Used to mount laddder rack with 2" sidebar to
(2) 2" x 3/8" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-FC1.875T-2-YC |
Factory Direct |
J-Clip Kit, Gold
Iridite, Used to mount laddder rack with 2" sidebar to
(2) 2" x 9/16" auxiliary support channel, contains (1)
J-Clip, (1) tabbed framing clip, (1) 1/2" lock washer,
(1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-4.5 |
Factory Direct |
J-Clip, Zinc
Plated, Used to mount laddder rack with 1.5" sidebar to
(2) 2" auxiliary support channels, contains (1) J-Clip,
(1) 1/2" lock washer, (1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-5 |
Factory Direct |
J-Clip, Zinc
Plated, Used to mount laddder rack with 2" sidebar to
(2) 2" auxiliary support channels, contains (1) J-Clip,
(1) 1/2" lock washer, (1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-4.5-YC |
Factory Direct |
J-Clip, Gold
Iridite, Used to mount laddder rack with 1.5" sidebar to
(2) 2" auxiliary support channels, contains (1) J-Clip,
(1) 1/2" lock washer, (1) 1/2" hex nut, 0.5 lbs |
|
MTP |
JCL-5-YC |
Factory Direct |
J-Clip, Gold
Iridite, Used to mount laddder rack with 2" sidebar to
(2) 2" auxiliary support channels, contains (1) J-Clip,
(1) 1/2" lock washer, (1) 1/2" hex nut, 0.5 lbs |
|
MTP |
SCL-FC1.5 |
Factory Direct |
Spanner Clip Kit,
Zinc Plated, Used to mount laddder rack with 1.5"
sidebar to (2) 2" x 3/8" auxiliary support channel,
contains (1) spanner clip, (1) tabbed framing clip, (1)
1/2" lock washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-FC1.875T |
Factory Direct |
Spanner Clip Kit,
Zinc Plated, Used to mount laddder rack with 1.5"
sidebar to (2) 2" x 9/16" auxiliary support channel,
contains (1) spanner clip, (1) tabbed framing clip, (1)
1/2" lock washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-FC1.5-2 |
Factory Direct |
Spanner Clip Kit,
Zinc Plated, Used to mount laddder rack with 2" sidebar
to (2) 2" x 3/8" auxiliary support channel, contains (1)
spanner clip, (1) tabbed framing clip, (1) 1/2" lock
washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-FC1.875T-2 |
Factory Direct |
Spanner Clip Kit,
Zinc Plated, Used to mount laddder rack with 2" sidebar
to (2) 2" x 9/16" auxiliary support channel, contains
(1) spanner clip, (1) tabbed framing clip, (1) 1/2" lock
washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-FC1.5-YC |
Factory Direct |
Spanner Clip Kit,
Gold Iridite, Used to mount laddder rack with 1.5"
sidebar to (2) 2" x 3/8" auxiliary support channel,
contains (1) spanner clip, (1) tabbed framing clip, (1)
1/2" lock washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-FC1.875T-YC |
Factory Direct |
Spanner Clip Kit,
Gold Iridite, Used to mount laddder rack with 1.5"
sidebar to (2) 2" x 9/16" auxiliary support channel,
contains (1) spanner clip, (1) tabbed framing clip, (1)
1/2" lock washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-FC1.5-2-YC |
Factory Direct |
Spanner Clip Kit,
Gold Iridite, Used to mount laddder rack with 2" sidebar
to (2) 2" x 3/8" auxiliary support channel, contains (1)
spanner clip, (1) tabbed framing clip, (1) 1/2" lock
washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-FC1.875T-2-YC |
Factory Direct |
Spanner Clip Kit,
Gold Iridite, Used to mount laddder rack with 2" sidebar
to (2) 2" x 9/16" auxiliary support channel, contains
(1) spanner clip, (1) tabbed framing clip, (1) 1/2" lock
washer, (1) 1/2" hex nut, 0.55 lbs |
|
MTP |
SCL-4.5 |
Factory Direct |
Spanner Clip,
Zinc Plated, Used to mount laddder rack with 1.5"
sidebar to (2) 2" auxiliary support channels, contains
(1) spanner clip, (1) 1/2" lock washer, (1) 1/2" hex
nut, 0.5 lbs |
|
MTP |
SCL-5 |
Factory Direct |
Spanner Clip,
Zinc Plated, Used to mount laddder rack with 2" sidebar
to (2) 2" auxiliary support channels, contains (1)
spanner clip, (1) 1/2" lock washer, (1) 1/2" hex nut,
0.5 lbs |
|
MTP |
SCL-4.5-YC |
Factory Direct |
Spanner Clip,
Gold Iridite, Used to mount laddder rack with 1.5"
sidebar to (2) 2" auxiliary support channels, contains
(1) spanner clip, (1) 1/2" lock washer, (1) 1/2" hex
nut, 0.5 lbs |
|
MTP |
SCL-5-YC |
Factory Direct |
Spanner Clip,
Gold Iridite, Used to mount laddder rack with 2" sidebar
to (2) 2" auxiliary support channels, contains (1)
spanner clip, (1) 1/2" lock washer, (1) 1/2" hex nut,
0.5 lbs |
|
MTP |
DJCL-F1.875ST |
Factory Direct |
Double J-Clip Kit,
Zinc Plated, Used to mount double ladder rack
each with 1.5" sidebars to auxiliary support channel,
0.75 lbs |
|
MTP |
DJCL-F1.875ST-2 |
Factory Direct |
Double J-Clip Kit,
Zinc Plated, Used to mount double ladder rack
each with 2" sidebars to auxiliary support channel, 0.75
lbs |
|
MTP |
DJCL-F1.875ST-YC |
Factory Direct |
Double J-Clip Kit,
Gold Iridite, Used to mount double ladder rack
each with 1.5" sidebars to auxiliary support channel,
0.75 lbs |
|
MTP |
DJCL-F1.875ST-2-YC |
Factory Direct |
Double J-Clip Kit,
Gold Iridite, Used to mount double ladder rack
each with 2" sidebars to auxiliary support channel, 0.75
lbs |
|
MTP |
DSCL-F1.875ST |
Factory Direct |
Double Spanner Clip Kit,
Zinc Plated, Used to mount double ladder rack
each with 1.5" sidebars to auxiliary support channel,
0.9 lbs |
|
MTP |
DSCL-F1.875ST-2 |
Factory Direct |
Double Spanner Clip Kit,
Zinc Plated, Used to mount double ladder rack
each with 2" sidebars to auxiliary support channel, 0.95
lbs |
|
MTP |
DSCL-F1.875ST-YC |
Factory Direct |
Double Spanner Clip Kit,
Gold Iridite, Used to mount double ladder rack
each with 1.5" sidebars to auxiliary support channel,
0.9 lbs |
|
MTP |
DSCL-F1.875ST-2-YC |
Factory Direct |
Double Spanner Clip Kit,
Gold Iridite, Used to mount double ladder rack
each with 2" sidebars to auxiliary support channel, 0.95
lbs |
|
MTP |
REC |
Factory Direct |
Runway Extension Clamp,
Zinc Plated, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) clamps, (1) 5/16"
x 2.25" CB, (1) 5/16" NC nut, (1) 5/16" lock washer,
0.48 lbs |
|
MTP |
REC-2 |
Factory Direct |
Runway Extension Clamp,
Zinc Plated, Used to join ladder rack sections
each with 2" sidebars, contains (2) clamps, (1) 3/8" x
2.75" CB, (1) 3/8" NC nut, (1) 3/8" lock washer, 0.5 lbs |
|
MTP |
REC-SS |
Factory Direct |
Runway Extension Clamp w/ anchoring set screws,
Zinc Plated, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) clamps, (1) 5/16"
x 2.25" CB, (1) 5/16" NC nut, (1) 5/16" lock washer, 0.5
lbs |
|
MTP |
REC-2-SS |
Factory Direct |
Runway Extension Clamp w/ anchoring set screws,
Zinc Plated, Used to join ladder rack sections
each with 2" sidebars, contains (2) clamps, (1) 3/8" x
2.75" CB, (1) 3/8" NC nut, (1) 3/8" lock washer, 0.52
lbs |
|
MTP |
REC-YC |
Factory Direct |
Runway Extension Clamp,
Gold Iridite, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) clamps, (1) 5/16"
x 2.25" CB, (1) 5/16" NC nut, (1) 5/16" lock washer,
0.48 lbs |
|
MTP |
REC-2-YC |
Factory Direct |
Runway Extension Clamp,
Gold Iridite, Used to join ladder rack sections
each with 2" sidebars, contains (2) clamps, (1) 3/8" x
2.75" CB, (1) 3/8" NC nut, (1) 3/8" lock washer, 0.5 lbs |
|
MTP |
REC-SS-YC |
Factory Direct |
Runway Extension Clamp w/ anchoring set screws,
Gold Iridite, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) clamps, (1) 5/16"
x 2.25" CB, (1) 5/16" NC nut, (1) 5/16" lock washer, 0.5
lbs |
|
MTP |
REC-2-SS-YC |
Factory Direct |
Runway Extension Clamp w/ anchoring set screws,
Gold Iridite, Used to join ladder rack sections
each with 2" sidebars, contains (2) clamps, (1) 3/8" x
2.75" CB, (1) 3/8" NC nut, (1) 3/8" lock washer, 0.52
lbs |
|
MTP |
RJK |
Factory Direct |
Runway Junction Kit,
Zinc Plated, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) of item REC, 0.96
lbs |
|
MTP |
RJK-2 |
Factory Direct |
Runway Junction Kit,
Zinc Plated, Used to join ladder rack sections
each with 2" sidebars, contains (2) of item REC-2, 1 lbs |
|
MTP |
RJK-SS |
Factory Direct |
Runway Junction Kit,
Zinc Plated, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) of item REC-SS, 1
lbs |
|
MTP |
RJK-2-SS |
Factory Direct |
Runway Junction Kit,
Zinc Plated, Used to join ladder rack sections
each with 2" sidebars, contains (2) of item REC-2-SS,
1.05 lbs |
|
MTP |
RJK-YC |
Factory Direct |
Runway Junction Kit,
Gold Iridite, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) of item REC, 0.96
lbs |
|
MTP |
RJK-2-YC |
Factory Direct |
Runway Junction Kit,
Gold Iridite, Used to join ladder rack sections
each with 2" sidebars, contains (2) of item REC-2, 1 lbs |
|
MTP |
RJK-SS-YC |
Factory Direct |
Runway Junction Kit,
Gold Iridite, Used to join ladder rack sections
each with 1.5" sidebars, contains (2) of item REC-SS, 1
lbs |
|
MTP |
RJK-2-SS-YC |
Factory Direct |
Runway Junction Kit,
Gold Iridite, Used to join ladder rack sections
each with 2" sidebars, contains (2) of item REC-2-SS,
1.05 lbs |
|
MTP |
RJK-2/1.5 |
Factory Direct |
Runway Junction/Reducer Kit,
Zinc Plated, Used to junction ladder rack with 2"
sidebar to ladder rack with 1.5" sidebar, contains (1)
of item RJK-2 and (2) fillers, 1.1 lbs |
|
MTP |
RJK-2/1.5-YC |
Factory Direct |
Runway Junction/Reducer Kit,
Gold Iridite, Used to junction ladder rack with
2" sidebar to ladder rack with 1.5" sidebar, contains
(1) of item RJK-2 and (2) fillers, 1.1 lbs |
|
MTP |
RJK-HD |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Zinc Plated, Used as junction for ladder racks
with single 1.5" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
RJK-HD-2 |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Zinc Plated, Used as junction for ladder racks
with single 2" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
DRJK-HD |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Zinc Plated, Used as junction for ladder racks
with double 1.5" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
DRJK-HD-2 |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Zinc Plated, Used as junction for ladder racks
with double 2" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
RJK-HD-YC |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Gold Iridite, Used as junction for ladder racks
with single 1.5" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
RJK-HD-2-YC |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Gold Iridite, Used as junction for ladder racks
with single 2" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
DRJK-HD-YC |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Gold Iridite, Used as junction for ladder racks
with double 1.5" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
DRJK-HD-2-YC |
Factory Direct |
Runway Junction Kit - Heavy Duty,
Gold Iridite, Used as junction for ladder racks
with double 2" sidebars, contains (2) clamps, (4) 1/4
HHCS, (4) 1/4" lockwashers, (4) 1/4" hex nuts, 0 lbs |
|
MTP |
CC-B |
Factory Direct |
Corner Clamp Bracket,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 1-1/2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.35 lbs |
|
MTP |
CC-B-2 |
Factory Direct |
Corner Clamp Bracket,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.36 lbs |
|
MTP |
CC-B-SS |
Factory Direct |
Corner Clamp Bracket,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 1-1/2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.37 lbs |
|
MTP |
CC-B-2-SS |
Factory Direct |
Corner Clamp Bracket,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.38 lbs |
|
MTP |
CC-B-YC |
Factory Direct |
Corner Clamp Bracket,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 1-1/2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.35 lbs |
|
MTP |
CC-B-2-YC |
Factory Direct |
Corner Clamp Bracket,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.36 lbs |
|
MTP |
CC-B-SS-YC |
Factory Direct |
Corner Clamp Bracket,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 1-1/2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.37 lbs |
|
MTP |
CC-B-2-SS-YC |
Factory Direct |
Corner Clamp Bracket,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
Brackets, (1) 3/8" NC x 2" CB, (1) 3/8" Hex Nut, (1)
3/8" Lock Washer, 0.38 lbs |
|
MTP |
CC-JK |
Factory Direct |
Corner Clamp Junction Kit,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2) CC-B,
0.64 lbs |
|
MTP |
CC-JK-2 |
Factory Direct |
Corner Clamp Junction Kit,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
CC-B-2, 0.66 lbs |
|
MTP |
CC-JK-SS |
Factory Direct |
Corner Clamp Junction Kit,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2) CC-B,
0.66 lbs |
|
MTP |
CC-JK-2-SS |
Factory Direct |
Corner Clamp Junction Kit,
Zinc Plated, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
CC-B-2, 0.68 lbs |
|
MTP |
CC-JK-YC |
Factory Direct |
Corner Clamp Junction Kit,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2) CC-B,
0.64 lbs |
|
MTP |
CC-JK-2-YC |
Factory Direct |
Corner Clamp Junction Kit,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
CC-B-2, 0.66 lbs |
|
MTP |
CC-JK-SS-YC |
Factory Direct |
Corner Clamp Junction Kit,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2) CC-B,
0.66 lbs |
|
MTP |
CC-JK-2-SS-YC |
Factory Direct |
Corner Clamp Junction Kit,
Gold Iridite, Used for perpendicular ladder rack
to ladder rack junctions or corners, contains (2)
CC-B-2, 0.68 lbs |
|
MTP |
CC-JK-2/1.5 |
Factory Direct |
Corner Clamp Junction/Reducer Kit,
Zinc Plated, Used to junction 2" ladder rack to
1.5" stringer ladder rack at 90 deg, contains (2)
Fillers, (1) CC-JK-2, 0.76 lbs |
|
MTP |
CC-JK-2/1.5-YC |
Factory Direct |
Corner Clamp Junction/Reducer Kit,
Gold Iridite, Used to junction 2" ladder rack to
1.5" stringer ladder rack at 90 deg, contains (2)
Fillers, (1) CC-JK-2, 0.76 lbs |
|
MTP |
ACC-JK |
Factory Direct |
Adjustable Ladder Corner Clamp,
Zinc Plated, Used to connect ladder rack stringer
at angles from 0 deg to 90 deg, contains (4) Spice
Brackets, (2) HHCS 3/8, (2) HN 3/8, (2) LW 3/8, 1 lbs |
|
MTP |
ACC-JK-2 |
Factory Direct |
Adjustable Ladder Corner Clamp,
Zinc Plated, Used to connect ladder rack stringer
at angles from 0 deg to 90 deg, contains (4) Spice
Brackets, (2) HHCS 3/8, (2) HN 3/8, (2) LW 3/8, 1.25 lbs |
|
MTP |
ACC-JK-YC |
Factory Direct |
Adjustable Ladder Corner Clamp,
Gold Iridite, Used to connect ladder rack
stringer at angles from 0 deg to 90 deg, contains (4)
Spice Brackets, (2) HHCS 3/8, (2) HN 3/8, (2) LW 3/8, 1
lbs |
|
MTP |
ACC-JK-2-YC |
Factory Direct |
Adjustable Ladder Corner Clamp,
Gold Iridite, Used to connect ladder rack
stringer at angles from 0 deg to 90 deg, contains (4)
Spice Brackets, (2) HHCS 3/8, (2) HN 3/8, (2) LW 3/8,
1.25 lbs |
|
MTP |
CR-EP-6 |
Factory Direct |
Cable Runway End Tube/Bar, 6"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 0.45 lbs |
|
MTP |
CR-EP-12 |
Factory Direct |
Cable Runway End Tube/Bar, 12"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 0.75 lbs |
|
MTP |
CR-EP-15 |
Factory Direct |
Cable Runway End Tube/Bar, 15"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 0.94 lbs |
|
MTP |
CR-EP-18 |
Factory Direct |
Cable Runway End Tube/Bar, 18"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 1.13 lbs |
|
MTP |
CR-EP-20 |
Factory Direct |
Cable Runway End Tube/Bar, 20"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 1.26 lbs |
|
MTP |
CR-EP-24 |
Factory Direct |
Cable Runway End Tube/Bar, 24"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 1.5 lbs |
|
MTP |
CR-EP-30 |
Factory Direct |
Cable Runway End Tube/Bar, 30"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 1.69 lbs |
|
MTP |
CR-EP-36 |
Factory Direct |
Cable Runway End Tube/Bar, 36"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 1.88 lbs |
|
MTP |
CR-EP-12-2 |
Factory Direct |
Cable Runway End Tube/Bar, 12"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 2.48 lbs |
|
MTP |
CR-EP-15-2 |
Factory Direct |
Cable Runway End Tube/Bar, 15"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 3.1 lbs |
|
MTP |
CR-EP-18-2 |
Factory Direct |
Cable Runway End Tube/Bar, 18"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 3.72 lbs |
|
MTP |
CR-EP-20-2 |
Factory Direct |
Cable Runway End Tube/Bar, 20"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 4.13 lbs |
|
MTP |
CR-EP-24-2 |
Factory Direct |
Cable Runway End Tube/Bar, 24"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 4.96 lbs |
|
MTP |
CR-EP-30-2 |
Factory Direct |
Cable Runway End Tube/Bar, 30"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 5.79 lbs |
|
MTP |
CR-EP-36-2 |
Factory Direct |
Cable Runway End Tube/Bar, 36"" width,
Hollow Steel, Powdercoat Telco Grey, Used to
terminate runway (sidebar for ladder rack end), 6.62 lbs |
|
MTP |
RTK-6 |
Factory Direct |
Runway Termination Kit, 6"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 1 lbs |
|
MTP |
RTK-12 |
Factory Direct |
Runway Termination Kit, 12"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 1.35 lbs |
|
MTP |
RTK-15 |
Factory Direct |
Runway Termination Kit, 15"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 1.5 lbs |
|
MTP |
RTK-18 |
Factory Direct |
Runway Termination Kit, 18"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 1.7 lbs |
|
MTP |
RTK-20 |
Factory Direct |
Runway Termination Kit, 20"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 1.85 lbs |
|
MTP |
RTK-24 |
Factory Direct |
Runway Termination Kit, 24"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 2.05 lbs |
|
MTP |
RTK-30 |
Factory Direct |
Runway Termination Kit, 30"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 2.4 lbs |
|
MTP |
RTK-36 |
Factory Direct |
Runway Termination Kit, 36"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 2.75 lbs |
|
MTP |
RTK-12-2 |
Factory Direct |
Runway Termination Kit, 12"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 3.1 lbs |
|
MTP |
RTK-15-2 |
Factory Direct |
Runway Termination Kit, 15"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 3.7 lbs |
|
MTP |
RTK-18-2 |
Factory Direct |
Runway Termination Kit, 18"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 4.35 lbs |
|
MTP |
RTK-20-2 |
Factory Direct |
Runway Termination Kit, 20"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 4.75 lbs |
|
MTP |
RTK-24-2 |
Factory Direct |
Runway Termination Kit, 24"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 5.55 lbs |
|
MTP |
RTK-30-2 |
Factory Direct |
Runway Termination Kit, 30"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 6.65 lbs |
|
MTP |
RTK-36-2 |
Factory Direct |
Runway Termination Kit, 36"" width,
Steel, Powdercoat Telco Grey, Used to terminate
runway (sidebar for ladder rack end), 7.75 lbs |
|
MTP |
JK-VRW-3 |
Factory Direct |
Junction Kit - Variable Runway Widths, 3", Zinc Plated,
Used to reduce or expand runway widths, contains (2)
CC-B, (1) REC, (1)VRA-x, 1.3 lbs |
|
MTP |
JK-VRW-6 |
Factory Direct |
Junction Kit - Variable Runway Widths, 6", Zinc Plated,
Used to reduce or expand runway widths, contains (2)
CC-B, (1) REC, (1)VRA-x, 1.5 lbs |
|
MTP |
JK-VRW-9 |
Factory Direct |
Junction Kit - Variable Runway Widths, 9", Zinc Plated,
Used to reduce or expand runway widths, contains (2)
CC-B, (1) REC, (1)VRA-x, 1.7 lbs |
|
MTP |
JK-VRW-3-2 |
Factory Direct |
Junction Kit - Variable Runway Widths, 3", Zinc Plated,
Used to reduce or expand runway widths, contains (2)
CC-B-2, (1) REC-2, (1)VRA-x-2, 1.75 lbs |
|
MTP |
JK-VRW-6-2 |
Factory Direct |
Junction Kit - Variable Runway Widths, 6", Zinc Plated,
Used to reduce or expand runway widths, contains (2)
CC-B-2, (1) REC-2, (1)VRA-x-2, 2.4 lbs |
|
MTP |
JK-VRW-9-2 |
Factory Direct |
Junction Kit - Variable Runway Widths, 9", Zinc Plated,
Used to reduce or expand runway widths, contains (2)
CC-B-2, (1) REC-2, (1)VRA-x-2, 2.8 lbs |
|
MTP |
JK-VRW-3-YC |
Factory Direct |
Junction Kit - Variable Runway Widths, 3", Gold Iridite,
used to reduce or expand runway widths, contains (2)
CC-B, (1) REC, (1)VRA-x, 1.3 lbs |
|
MTP |
JK-VRW-6-YC |
Factory Direct |
Junction Kit - Variable Runway Widths, 6", Gold Iridite,
used to reduce or expand runway widths, contains (2)
CC-B, (1) REC, (1)VRA-x, 1.5 lbs |
|
MTP |
JK-VRW-9-YC |
Factory Direct |
Junction Kit - Variable Runway Widths, 9", Gold Iridite,
used to reduce or expand runway widths, contains (2)
CC-B, (1) REC, (1)VRA-x, 1.7 lbs |
|
MTP |
JK-VRW-3-2-YC |
Factory Direct |
Junction Kit - Variable Runway Widths, 3", Gold Iridite,
used to reduce or expand runway widths, contains (2)
CC-B-2, (1) REC-2, (1)VRA-x-2, 1.75 lbs |
|
MTP |
JK-VRW-6-2-YC |
Factory Direct |
Junction Kit - Variable Runway Widths, 6", Gold Iridite,
used to reduce or expand runway widths, contains (2)
CC-B-2, (1) REC-2, (1)VRA-x-2, 2.4 lbs |
|
MTP |
JK-VRW-9-2-YC |
Factory Direct |
Junction Kit - Variable Runway Widths, 9", Gold Iridite,
used to reduce or expand runway widths, contains (2)
CC-B-2, (1) REC-2, (1)VRA-x-2, 2.8 lbs |
|
MTP |
ACR-CK |
Factory Direct |
Adjustable Runway Connection Kit,
Zinc Plated, Used to angle runway for smooth
cable transitioning, contains (4) Brackets, (8)
1/4"x7/8" carriage bolts, (8) 1/4" lock washers, (8)
1/4" hex nuts, (2) 3/8"x7/8" HHCS, (2) 3/8" lock
washers, (2) 3/8" hex nuts, 2.5 lbs |
|
MTP |
ACR-CK-2 |
Factory Direct |
Adjustable Runway Connection Kit,
Zinc Plated, Used to angle runway for smooth
cable transitioning, contains (4) Brackets, (8)
1/4"x7/8" carriage bolts, (8) 1/4" lock washers, (8)
1/4" hex nuts, (2) 3/8"x7/8" HHCS, (2) 3/8" lock
washers, (2) 3/8" hex nuts, 2.55 lbs |
|
MTP |
ACR-CK-YC |
Factory Direct |
Adjustable Runway Connection Kit, Gold Iridite, used to
angle runway for smooth cable transitioning, contains
(4) Brackets, (8) 1/4"x7/8" carriage bolts, (8) 1/4"
lock washers, (8) 1/4" hex nuts, (2) 3/8"x7/8" HHCS, (2)
3/8" lock washers, (2) 3/8" hex nuts, 2.5 lbs |
|
MTP |
ACR-CK-2-YC |
Factory Direct |
Adjustable Runway Connection Kit, Gold Iridite, used to
angle runway for smooth cable transitioning, contains
(4) Brackets, (8) 1/4"x7/8" carriage bolts, (8) 1/4"
lock washers, (8) 1/4" hex nuts, (2) 3/8"x7/8" HHCS, (2)
3/8" lock washers, (2) 3/8" hex nuts, 2.55 lbs |
|
MTP |
ACRCKSM |
Factory Direct |
Side Mount Adjustable Runway Connection Kit,
Zinc Plated, Used to attach vertical cable runway
to the side of horizontal cable runway, contains (2)
side mount brackets, (1) 3/8" hardware kit, (1) 1/4"
hardware kit, 0 lbs |
|
MTP |
ACRCKSM-2 |
Factory Direct |
Side Mount Adjustable Runway Connection Kit,
Zinc Plated, Used to attach vertical cable runway
to the side of horizontal cable runway, contains (2)
side mount brackets, (1) 3/8" hardware kit, (1) 1/4"
hardware kit, 0 lbs |
|
MTP |
ACRCKSM-YC |
Factory Direct |
Side Mount Adjustable Runway Connection Kit, Gold
Iridite, used to attach vertical cable runway to the
side of horizontal cable runway, contains (2) side mount
brackets, (1) 3/8" hardware kit, (1) 1/4" hardware kit,
0 lbs |
|
MTP |
ACRCKSM-2-YC |
Factory Direct |
Side Mount Adjustable Runway Connection Kit, Gold
Iridite, used to attach vertical cable runway to the
side of horizontal cable runway, contains (2) side mount
brackets, (1) 3/8" hardware kit, (1) 1/4" hardware kit,
0 lbs |
|
MTP |
ACR-CKV |
Factory Direct |
Vertical Adjustable Runway Connector Kit,
Zinc Plated, Used to connect ladder rack in
vertical direction, contains (4) brackts, (1) 3/8"
hardware kit, (1) 1/4" hardware kit, 2.5 lbs |
|
MTP |
ACR-CKV-2 |
Factory Direct |
Vertical Adjustable Runway Connector Kit,
Zinc Plated, Used to connect ladder rack in
vertical direction, contains (4) brackts, (1) 3/8"
hardware kit, (1) 1/4" hardware kit, 2.75 lbs |
|
MTP |
ACR-CKV-YC |
Factory Direct |
Vertical Adjustable Runway Connector Kit, Gold Iridite,
used to connect ladder rack in vertical direction,
contains (4) brackts, (1) 3/8" hardware kit, (1) 1/4"
hardware kit, 2.5 lbs |
|
MTP |
ACR-CKV-2-YC |
Factory Direct |
Vertical Adjustable Runway Connector Kit, Gold Iridite,
used to connect ladder rack in vertical direction,
contains (4) brackts, (1) 3/8" hardware kit, (1) 1/4"
hardware kit, 2.75 lbs |
|
MTP |
CR45-CK |
Factory Direct |
Runway Connection Kit 45 deg,
Zinc Plated, Used to connect cable runway at 45
deg angle, contains (4) 45 deg clamps, (4) edge clamps,
(4) 3/8" hex nuts, (4) 3/8"x 2-3/8" HHCS, 2 lbs |
|
MTP |
CR45-CK-2 |
Factory Direct |
Runway Connection Kit 45 deg,
Zinc Plated, Used to connect cable runway at 45
deg angle, contains (4) 45 deg clamps, (4) edge clamps,
(4) 3/8" hex nuts, (4) 3/8"x 2-3/8" HHCS, 2 lbs |
|
MTP |
CR45-CK-YC |
Factory Direct |
Runway Connection Kit 45 deg, Gold Iridite, used to
connect cable runway at 45 deg angle, contains (4) 45
deg clamps, (4) edge clamps, (4) 3/8" hex nuts, (4)
3/8"x 2-3/8" HHCS, 2 lbs |
|
MTP |
CR45-CK-2-YC |
Factory Direct |
Runway Connection Kit 45 deg, Gold Iridite, used to
connect cable runway at 45 deg angle, contains (4) 45
deg clamps, (4) edge clamps, (4) 3/8" hex nuts, (4)
3/8"x 2-3/8" HHCS, 2 lbs |
|
MTP |
CR90-CK |
Factory Direct |
Runway Connection Kit 90 deg,
Zinc Plated, Used to connect cable runway at 90
deg angle, contains (4) 90 deg clamps, (4) edge clamps,
(4) 3/8"-16 hardware kit, 2 lbs |
|
MTP |
CR90-CK-2 |
Factory Direct |
Runway Connection Kit 90 deg,
Zinc Plated, Used to connect cable runway at 90
deg angle, contains (4) 90 deg clamps, (4) edge clamps,
(4) 3/8"-16 hardware kit, 2 lbs |
|
MTP |
CR90-CK-YC |
Factory Direct |
Runway Connection Kit 90 deg, Gold Iridite, used to
connect cable runway at 90 deg angle, contains (4) 90
deg clamps, (4) edge clamps, (4) 3/8"-16 hardware kit, 2
lbs |
|
MTP |
CR90-CK-2-YC |
Factory Direct |
Runway Connection Kit 90 deg, Gold Iridite, used to
connect cable runway at 90 deg angle, contains (4) 90
deg clamps, (4) edge clamps, (4) 3/8"-16 hardware kit, 2
lbs |
|
MTP |
RRSJK-1.5TO2 |
Factory Direct |
Runway Sidebar (stringer) Reducer Kit,
Zinc Plated, Used to join 2" ladder sidebar
(stringer) with 1.5" ladder sidebar, contains (2) 6"
Metal Plate, (2) REC-2, (2) REC, 3.1 lbs |
|
MTP |
RRSJK-1.5TO2-YC |
Factory Direct |
Runway Sidebar (stringer) Reducer Kit, Gold Iridite,
used to join 2" ladder sidebar (stringer) with 1.5"
ladder sidebar, contains (2) 6" Metal Plate, (2) REC-2,
(2) REC, 3.1 lbs |
|
MTP |
RRTJK-1.5TO2 |
Factory Direct |
Runway Sidebar (stringer) Reducing "T" Connection Kit,
Zinc Plated, Used to join 1.5" to 2" ladder
sidbear in "T" junction, contains (2) 6" Metal Plate,
(2) REC, (2) CC-B-2, 4.1 lbs |
|
MTP |
RRTJK-2TO1.5 |
Factory Direct |
Runway Sidebar (stringer) Reducing "T" Connection Kit,
Zinc Plated, Used to join 2" to 1.5" ladder
sidebar in "T" junction, contains (2) 6" Metal Plate,
(2) REC-2, (2) CC-B, 4.1 lbs |
|
MTP |
RRTJK-1.5TO2-YC |
Factory Direct |
Runway Sidebar (stringer) Reducing "T" Connection Kit,
Gold Iridite, used to join 1.5" to 2" ladder sidbear in
"T" junction, contains (2) 6" Metal Plate, (2) REC, (2)
CC-B-2, 4.1 lbs |
|
MTP |
RRTJK-2TO1.5-YC |
Factory Direct |
Runway Sidebar (stringer) Reducing "T" Connection Kit,
Gold Iridite, used to join 2" to 1.5" ladder sidebar in
"T" junction, contains (2) 6" Metal Plate, (2) REC-2,
(2) CC-B, 4.1 lbs |
|
